7 Ways to Fix Car Key That Won’t Turn in Ignition

You are all set to hit the road, and your key stuck in the ignition. We know this is the last thing you expect. However, it is part of the life of a vehicle owner. Each time you insert the key in the ignition, there may be surprises.

Typically automatic transmission vehicles have the issue of key won’t turn in the ignition. Nevertheless, if you know some simple steps, you can easily avoid this issue.

Why key won’t turn in the ignition

Three major topics are related to key-stuck-in-ignition problems. You will find them connected with components, ignition lock cylinder, and the key itself.

Component related issues

Sometimes the steering wheel locking can lock the key. As a result, the car key won’t turn in the ignition. Typically, removing the key locks the steering; however, the process goes opposite.

In some automatic transmission vehicles, you cannot turn the key until the car is in the park or neutral gear.

One of the most common components related issues is the battery. If the battery is dead, you won’t be able to turn the key and start the vehicle.

Problems with Ignition Lock Cylinder

The ignition lock cylinder is a piece of sensitive equipment. If some obstacles are stuck in it, you cannot insert the key in the ignition. Use a powerful searchlight to check the type of obstacles.

Like a padlock, the ignition cylinder comes with a combination of pins and springs. If any of those pins or springs got stuck, either you cannot insert the key or your car key won’t turn in the ignition.

You can use a tap hammer to loosen any pins or springs. Otherwise, you may have to do an ignition lock cylinder replacement.

Problems with the Key

If the key is worn or you have a broken key, you cannot insert it in the ignition. Besides, the broken key can be stuck in the ignition for good.

In the worst-case scenario, if the car is already cranked, that key stuck in ignition won’t turn off. Now, you need a good fix for this issue.

How to fix a car key won’t turn in the ignition

You may get confused thinking about what to do if the key in ignition won’t turn. Well, now you have all the solutions. Follow these seven easy steps to get rid of a car key that won’t turn in the ignition.

1.   Jiggle the Steering Wheel

If you found the key stuck in the ignition, the first thing you should do is to jiggle the steering. Check on which direction you can move it. Put some pressure towards the free end.

Hold the steering for a few seconds with extra pressure. It will help you to release the steering wheel locking and get the key out.

2.   Lube up the Lock

This is the easiest way of getting back the car key and turning it into the ignition. You can use the WD40 fluid to lube up the lock. Spray the lube into the lock mechanism and insert the key.

It is always better to use a dedicated lube from your vehicle manufacturer. Thus, in your next oil change or servicing, ask about the dedicated lube.

3.   Rapp the Key

If a car key won’t turn in the ignition, there may be some issue with the key. Rapping the worn key is the easiest way to fix any stuck key in the ignition problem.

Use a light hammer and put the key on the piece of wood. Hard surfaces and heavy hammer may turn the key beyond repair.

4.   Fix if the key is worn

Sometimes, it is not easy to fix if a key is worn. Now, you have to talk to a locksmith or go to a supermarket to get a spare key.

We recommend not trying fixing the key in your garage with regular tools. It is a delicate and professional task. Let the professionals handle it.

5.   Get a new Key

If you are still asking why the key won’t turn in the ignition after taking all these steps, it’s time to replace it. Yes, replace the old key and get a new one.

It is always better to get your new key from the manufacturer. However, they are expensive if you are looking for a key with a remote. Otherwise, you can get a new one at a reasonable price.

6.   Change the Ignition Cylinder

The ignition cylinder works as the ignition switch for your car. If there are no issues with the key, the reason behind the stuck key in the ignition is the cylinder. Replacing an ignition lock cylinder is an easy task now.

Find the lock pin of the cylinder assembly. Suppress the pin with proper tools to remove the assembly. Now, insert the new ignition cylinder, and you are good to go.

7.   Keep a spare key handy

Like a spare tire, it is always better to keep an extra key handy. If your car key is lost or broke, it will be the savior then. Most of the vehicle comes with 2-3 sets of keys. Thus, keep them handy.

It is not difficult to make a spare key from an automobile garage. However, we recommend you to get one from a renowned and trustworthy one like SerrurierBruxelles.

You can get 24/7 professional help on any key-related issues with guaranteed satisfaction. Our price is one of the most affordable in Brussels.

It’s time to conclude and Crank

It is always frustrating when you get to go, but the key is stuck in the ignition. However, the issue of why the key won’t turn in ignition will never bother you again.

Now, you know the nook and coon of a key that is stuck and stopping you from starting the vehicle. You can either try some of the steps to resolve the issue or can get professional help.

We are sure you never have to ask anybody anymore to anyone “what to do if the key in ignition won’t turn”?

Similar Posts