How is the appearance of your home right now? Do you like it the way you used to when you bought it or that love has since died and you are considering doing something to make it look beautiful again? Sometimes, you don’t need to do something big to make your home look lively again-all you need is a small and cheap update to make your structure look great again. For instance, most homeowners opt to add a fresh coat of paint to their exterior doors to make their homes look more appealing. You can also do that, but do you know how to paint exterior doors? Well, this is a simple project that any homeowner can DIY. However, there are some things you need to have and to know. If you find that you need help, or want to get more of your house, look for a Seattle painting company that will help you spruce your house up.
A Step By Step Guide on How to Paint Exterior Doors
The success of any DIY project is determined by knowing what you can handle and what leave to an expert. So, when you choose to DIY, make sure you know what the project requires and whether you have the skills to accomplish it. Take the following tips from Total Home Oakville to learn more on how to paint your exterior doors Oakville.
- Tack cloth
- Painters tape
- Adhesion premier – 1 quart
- High–density foam brushes and mini rollers
- Semi-Gloss or satin exterior paint – 1 quart
- Fine–grit sandpaper
Step 1: Removing and Prepping the Door
To start with on how to paint exterior doors Oakville, you should start by removing the door from its space and place it in a well-ventilated area. Ensure you have prepped that area with a cloth.
Using a screwdriver, remove the hinges and the hardware, and do not forget to label the sides to make it easy while returning. Ensure you check on the weather if you are planning to paint from the outside. Use painter’s tape to cover the glass to protect it from getting stained with paint.
Step 2: Sand the Surface
Scrub the door using a wet sponge to remove dirt and then sand it. For your painting to look flawless, the door has to be smooth and free from dirt. Sanding helps to get rid of stains and smooth the uneven parts.
When you sand the door, dust particles are produced, and you cannot paint while they are there. Use a wet tack cloth to remove the dust and let the door dry completely.
Step 3: Prime the Door
Once your exterior doors Oakville are clean and dry, use the dense foam roller to apply adhesion primer. Make sure you use even strokes while applying the primer to give your door a uniform appearance when it is done. Use the dense foam brush to apply the primer on the dented parts of the door. This ensures that no part goes untouched.
For consistency, avoid applying the primer on direct sunlight. It dries faster, affecting how you balance the toning. Once you have evened the primer, let it dry completely under warm temperature.
Step 4: Paint the Door in Sections
When the primer is completely dry, apply paint of your color choice in the following sequence in case of a panel door:
- Using a small paintbrush around the panels and paint trim them
- Use a roller to paint any panels that appear depressed or raised and make sure they are all painted
- The next bit is the center vertical strip. Paint it sparingly
- Reach for the horizons and paint
- Go for the utmost vertical stripes when you are through with the horizons
- The utmost part of your painting is the doorway facing the horizon
For the first layer, it is common to find marks left by stroking the brush or the roller. However, they should get away after you apply the second coating, which is usually the last. Make sure you are keen on the second one. You should achieve a smooth finish, ready to return the door when completely dry.
Step 5: Reinstall the Door
Check if the paint has dried completely. When you are sure it is dry, you can hang the door back, using the markings you made to guide you where to place each side. If you enjoy art, you can put some decorations to enhance your front door’s appearance.
Well, after this step, you should have known how to paint exterior doors Oakville and be in a position to DIY.